<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 7996] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>U-SBL-CAD CAM-UNI-050</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>U-SBL-CAD_CAM-UNI-050</Keyword>
  <SupportOrientation>-1</SupportOrientation>
  <Supplier>Ultrastom</Supplier>
  <SupplierLink>Ultrastom.com</SupplierLink>
  <SupplierVersion>Ver1.0   03.05.2024  OR</SupplierVersion>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <TypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.7</x>
        <y>0</y>
        <z>7</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>SBL-SMU.stl</MarkerFilename>
      <ScrewFilename>SBL-Screw-00256.stl</ScrewFilename>
      <ImplantFilename>SBL-NC-Analog-00397.stl</ImplantFilename>
      <DisplayInformation>NC LAB</DisplayInformation>
      <Keyword>NCLAB</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">8</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-70</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0</x>
        <y>1.88</y>
        <z>10.5</z>
      </RegistrationClickCenter>
      <MarkerFilename>SMIN-TOP.stl</MarkerFilename>
      <ScrewFilename>SBL-Screw-00256.stl</ScrewFilename>
      <ImplantFilename>SBL-NC-Analog-00397.stl</ImplantFilename>
      <DisplayInformation>NC INTRA</DisplayInformation>
      <Keyword>NCINTRA</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">8</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H1-01662-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H1-01662-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H1-01662-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H2-01663-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H2-01663-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H2-01663-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-B-H3-01664-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-B-H3-01664-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-B-H3-01664-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H1-01659-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H1-01659-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H1-01659-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H2-01660-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H2-01660-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H2-01660-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-40</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-50</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-60</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-NC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-NC-Abut-CAD_CAM-S-H3-01661-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-NC-Abut-CAD_CAM-S-H3-01661-70</DisplayInformation>
          <Keyword>SBL-NC-Abut-CAD_CAM-S-H3-01661-70</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.7</x>
        <y>0</y>
        <z>7</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>SBL-SMU.stl</MarkerFilename>
      <ScrewFilename>SBL-Screw-00256.stl</ScrewFilename>
      <ImplantFilename>SBL-RC-Analog-00398.stl</ImplantFilename>
      <DisplayInformation>RC LAB</DisplayInformation>
      <Keyword>RCLAB</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">8</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-70</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0</x>
        <y>1.88</y>
        <z>10.5</z>
      </RegistrationClickCenter>
      <MarkerFilename>SMIN-TOP.stl</MarkerFilename>
      <ScrewFilename>SBL-Screw-00256.stl</ScrewFilename>
      <ImplantFilename>SBL-RC-Analog-00398.stl</ImplantFilename>
      <DisplayInformation>RC INTRA</DisplayInformation>
      <Keyword>RCINTRA</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">8</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H1-01668-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H1-01668-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H1-01668-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H2-01669-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H2-01669-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H2-01669-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-B-H3-01670-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-B-H3-01670-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-B-H3-01670-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h1-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H1-01665-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H1-01665-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H1-01665-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h2-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H2-01666-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H2-01666-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H2-01666-70</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-40-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-40.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-40</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-40</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-50-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-50.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-50</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-50</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-60-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-60.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-60</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-60</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>SBL-RC-CADCAM-S-h3-70-050-Geo.stl</SupportFilename>
          <InterfaceFilename>SBL-RC-Abut-CAD_CAM-S-H3-01667-70.stl</InterfaceFilename>
          <DisplayInformation>SBL-RC-Abut-CAD_CAM-S-H3-01667-70</DisplayInformation>
          <Keyword>SBL-RC-Abut-CAD_CAM-S-H3-01667-70</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>Not yet signed</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename />
      <Signature />
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>